18. March 2021

The new series at Riftboards. Let's talk about ... In the first episode I talk about the board you need for the Chubanga V3 Foil.

12. February 2021

In this Blog I will show you the hole distance of the different Foils out there. At the moment I have the exact measurements of three Foils. I am interested in every Foil out there. So if you have a Foil wich is not listed here, please send me the measurements.

25. March 2020

The Gong Allvator Wing has the problem, that it will start to wobble when you pump it. The Wingspan is too big and the connection to the Fuselage fits a bit loose. But I have a solution. Check it out!

03. February 2020

I was finally able to test Moses' 695 wing. Since the temperatures were over 10 degrees and there was wind, I drove to Lake Constance for a stormy session.

20. November 2019

In this Blog you will find a small Video with all the Infos you need to know about the nem Powsurfer for 2020.

17. November 2019

In this short Blog Video you will see how a Powsurfer is made. You don't see all the details of the production. There are still some secrets in the production wich I don't want to share with you.

31. October 2019

In this Blog I will tell you all the difference between the Allvato XXL vs the Allvator XXL Pro. I didn't used the foil in waves. Only flat water pumping.

23. October 2019

This is a small "How to Surf Foil" on a lake when there are no waves. It is a super, simple and not very usable manual for everybody.

23. October 2017

In this Blog I will tell you how to sand your Foil to prevent sucked air during your session. If you follow these steps carefully you shouldn't have any problems with air on your wings and your Foil will be faster.

22. October 2017

Is the Beluga Nose the future for Foilboards? Read our test of the new Foil Raceboard with the Beluga Nose.